Install The Batteries - HP Photosmart M22 Guía De Comienzo Rápido

EastwoodQSG.fm Page 4 Thursday, December 23, 2004 3:58 PM
2.

Install the Batteries

1. Open the Battery/Memory card door on the side of the
camera by sliding the door toward the front of the
camera.
2. Insert the batteries as indicated inside the door.
3. Close the Battery/Memory card door by pushing the
door down and sliding the door toward the back of the
camera until the door latches.
You can expect performance similar to the following from the
different types of AA batteries that work in your camera:
Alkaline (Starter Batteries)
Lithium
NiMH (rechargeable)
If you use NiMH (rechargeable) batteries, be
sure that you fully charge them before using them
in the camera.
4 HP Photosmart M22/M23 Quick Start Guide
30 to 70 shots
180 to 320 shots
120 to 240 shots