Craftsman 919.167810 El Manual Del Propietario página 4

• If electrical sparks from compressor
come into contact with flammable
vapors, they may ignite, causing fire
or explosion.
• Restricting any of the compressor
ventilation openings will cause
serious overheating and could cause
fire.
• Unattended operation of this
product could result in personal
injury or property damage. To
reduce the risk of fire, do not
allow the compressor to operate
unattended.
WHAT CAN HAPPEN
• The compressed air directly from
your compressor is not safe for
breathing. The air stream may
contain carbon monoxide, toxic
vapors, or solid particles from the air
tank. Breathing these contaminant's
can cause serious injury or death.
• Sprayed materials such as paint,
paint solvents, paint remover,
insecticides, weed killers, may
contain harmful vapors and poisons.
N000395
HAZARD
RISK TO BREATHING (ASPHYXIATION)
4-ENG
• If spraying flammable materials, locate
compressor at least 20 feet (6.1 m)
away from spray area. An additional
length of air hose may be required.
• Store flammable materials in a secure
location away from compressor.
• Never place objects against or on
top of compressor.
• Operate compressor in an open area
at least 12" (30.5 cm) away from
any wall or obstruction that would
restrict the flow of fresh air to the
ventilation openings.
• Operate compressor in a clean, dry
well ventilated area. Do not operate
unit indoors or in any confined area.
Store unit indoors.
• Always remain in attendance with
the product when it is operating.
• Disconnect electrical supply when
not in use.
HOW TO PREVENT IT
• Air obtained directly from the
compressor should never be used to
supply air for human consumption.
In order to use air produced by this
compressor for breathing, suitable
filters and in-line safety equipment
must be properly installed. In-line
filters and safety equipment used
in conjunction with the compressor
must be capable of treating air to all
applicable local and federal codes
prior to human consumption.
• Work in an area with good cross
ventilation. Read and follow the
safety instructions provided on the
label or safety data sheets for the
materials you are spraying. Always
use certified safety equipment: OSHA/
MSHA/NIOSH respiratory protection
designed for use with your specific
application.