Safety Instructions - Extel O'CUP Instrucciones De Uso E Instalación

Defect
The monitor does not
turn on
No image
No sound
If necessary, our technical website is at your disposal www.cfi-extel.com
GUARANTEE CONDITIONS :
This device is guaranteed for labour and parts in our premises.
The guarantee does not cover: the consumables (batteries, etc.) and the damages caused
by: misuse, improper installation, external intervention, deterioration by mechanical or
electrical shock, fall or atmospheric phenomenon.
• Never open the apparatus or the guarantee will be invalidated.
• For return in SAV, protect the screen to prevent scratching.
• Only ever clean with a soft cloth; never use solvents. Before cleaning, disconnect and
switch off the system.
The sales slip or the invoice is required as proof of purchase date.

8. SAFETY INSTRUCTIONS

The damages caused by the non-compliance to the manual lead to the expiration of the
warranty. We will not assume any responsibility for the resulting damage!
We will not assume any responsibility concerning any damage, to the goods or people,
caused by improper handling or by non compliance with the safety instructions.
This product has been manufactured in compliance with safety instructions. In order to
keep this status and ensuring the best operation of the product, the user must respect the
safety instructions and warnings contained in this manual.
The user of this system is responsible for checking whether the video surveillance is
compliant with the law in force in the country of use.
- You should only use this product within a voltage range between: 100-240 Volts and 50-60
Hertz. Never intend to use this product with a different voltage.
- Make sure all electrical connections of the system are compliant with instructions of use.
- In commercial establishments, make sure to respect the rules for preventing accidents
Cause
Power supply problem
• The camera is not powe-
red
• The signal is not received
by the monitor
• Setting
CFI EXTEL O'CUP - 02/2013 - V1
Solution
Check the connection of the
adaptor
• Check the connection of the
adaptor
• Bring closer the camera and
find a more suitable location
• Verify that the volume is not
in position minimum
GB6