Information - Longshine LCS-8131N Manual Del Usario

Information

Status
Extra Info
Channel
Authentication
Encryption
Network Type
IP Address
Sub Mask
Default Gateway
Link Speed
Throughput
Link Quality
Signal Strength 1
Signal Strength 2
Signal Strength 3
Noise Strength
HT
Shows the connecting status. Also shows the SSID while
connecting to a valid network.
Display link status in use.
Display current channel in use.
Authentication mode in use.
Encryption type in use.
Network type in use.
IP address of current connection.
Sub mask of current connection.
Default gateway of current connection.
Show current transmit rate and receive rate.
Display transmit and receive throughput in Mbps.
Display connection quality based on signal strength and
TX/RX packet error rate.
Receive signal strength 1, user can choose to display as
percentage or dBm format.
Receive signal strength 2, user can choose to display as
percentage or dBm format.
Receive signal strength 3, user can choose to display as
percentage or dBm format.
Display noise signal strength.
Display current HT status in use, containing BW, GI, MCS,
SNR0, and SNR1 value.
15