Longshine LCS-8131N Manual Del Usario página 35

1. SSID: AP name of user type. User also can select [Use Mac Address] to display
it.
2. Wireless Mode: Select wireless mode. 802.11 B/G mix, 802.11B only, 802.11G
only and 802.11 B/G/N mix mode are supported. When wireless card is 802.11N,
system default is 802.11 B/G/N mix; Otherwise system default is 802.11 B/G
mix (802.11 B/G/N mix selection item only exists for B/G/N adapter).
3. Country Region Code: eight countries to choose. Country channel list:
Classification
0: FCC (Canada)
1: ETSI
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISRAEL
7: ISRAEL
4. Wireless Protection: Auto, on, and off. System default is auto.
a. Auto: STA will dynamically change as AP announcement.
b. On: Always send frame with protection.
c. Off: Always send frame without protection.
5. Beacon (ms): The time between two beacons. System default is 100 ms.
6. TX Power: Manually force the AP transmits power. System default is 100%.
7. TX Rate: Manually force the Transmit using selected rate. Default is auto.
8. Idle Time: Manually force the Idle Time using selected value. Default is 300.
9. Channel: Manually force the AP using the channel. System default is channel 1.
10. Use Mac Address: Use MAC address of used wireless card to be AP name. System
default is APX (X is last number of Mac Address).
11. Security Setting: Authentication mode and encryption algorithm used within the
AP. System default is no authentication and encryption.
12. No forwarding among wireless clients: No beacon among wireless client, clients
can share information each other. System default is no forwarding.
13. Hide SSID: Prevent this AP from recognized in wireless network. This is disabled
as default.
14. Allow BW40 MHz: Allow BW40 MHz capability.
15. Default: Use system default value.
16. Apply: Apply the above changes.
Range
CH1 ~ CH11
CH1 ~ CH13
CH10 ~ CH11
CH10 ~ CH13
CH14 ~ CH14
CH1 ~ CH14
CH3 ~ CH9
CH5 ~ CH13
34