Security Settings - Longshine LCS-8131N Manual Del Usario

Security Settings

This page pops up after clicking the Security Settings button. Please follow the
instructions below:
1. Authentication
Type
2. Encryption Type Select an encryption type from the drop list.
3. WPA Pre-shared
Key
4. Group Rekey
Interval
5. WEP Key
Select to be open or WPA-PSK system.
A shared string between AP and STA. For WPA-PSK
authentication mode, this field must be filled with
character longer than 8 and less than 32 length.
(PCI only)
Only valid when
algorithm. The key will change compliance with
seconds or beacon that user set. (PCI device only)
Only valid when using WEP encryption algorithm.
The key must match the key on AP. There are
several formats to enter the keys.
a. Hexadecimal (40bits): 10 Hex characters.
b. Hexadecimal (128bits): 32Hex characters.
c. ASCII (40bits): 5 ASCII characters.
d. ASCII (128bits): 13 ASCII characters.
35
using WPA-PSK encryption