Window Requirements - GE AKL08 Manual Del Propietario E Instrucciones De Instalación

Read completely, then follow step-by-step.
1

Window Requirements

s
These instructions are for a standard double-
hung window. You will need to modify them for
other types of windows.
s
The air conditioner can be installed without
the accordion panels if needed to fit in a narrow
window. See the window opening dimensions.
s
All supporting parts must be secured to firm
wood, masonry or metal.
s
The electrical outlet must be within reach of the
power cord.
2
Storm Window Requirements
A storm window frame will not allow the air
conditioner to tilt towards the outside and
will keep it from draining properly. To adjust
for this, attach a piece of wood to the stool.
1/2" higher
than frame
Storm window
frame
3
Remove the Air Conditioner From the Case
Remove and discard the 2 shipping screws
A
from the bottom rear of the case.
WOOD PIECES—
WIDTH: 2"
LENGTH: Long enough to fit inside the window
frame.
Wood
THICKNESS: To determine the thickness, place a
piece of wood on the stool to make it 1/2" higher
than the top of the storm window frame.
Stool
Attach securely with nails or screws provided by
the installer.
B
15" min.
21-3/4" to 35-1/4"
(With accordion panels)
18" min.
(Without accordion panels)
Pull to unlatch the lower corners of the inlet
grille and lift it up and off.
11