GE AKL08 Manual Del Propietario E Instrucciones De Instalación página 12

Window installation instructions.
3
Remove the Air Conditioner From the Case (cont.)
Using the tab, pull up slightly on the filter
C
to release it and pull it down to remove.
Remove the two grille frame screws.
D
Grasp the lower corners of the grille frame
E
while pressing in on the case sides with your
finger tips. Pull out to release and lift it up.
NOTE: Do not pull the
bottom edge toward
you more than 3 " or
you may damage the
tabs of the grille.
On some models, you must also disconnect
F
the control connectors before the grille frame
can be removed. Press the locking tabs in
while pulling on the other side to release.
12
Grille frame screws
Press in
Pull
Press in
Remove the two locking screws and locking
G
brackets from the lower front of the unit.
Remove the screw securing the ground wire
H
to the right side face of the unit.
Slide the air conditioner from the case by
I
gripping the base pan handle and pulling
forward while bracing the case.
Ground wire
Screw