Remington Titanium MicroScreen Ultra Guía De Uso Y Cuidado página 5

THE FOLLOWING PROCEDURE SHOULD BE FOLLOW E D
IF YOU CHOOSE TO REMOVE THE BATTERY:
To avoid a possible electric shock hazard,
unplug cord from electric outlet and shaver.
Remove screen assembly by pressing the two
side buttons until the head assembly pulls off.
Remove the four corner screws holding the
upper housing in place. Squeeze the ends of
the two blade assemblies to bring them into
alignment with each other. Pull the housing
upward to remove.
Pry off the two side panels.
Remove the single screw holding the back
housing in place.
Pull the back housing off to expose the
batteries.
P ry and lift the bat t e ry assembly up from the
p r i n t e d circuit board.
Cut the wires on both ends of each battery to
remove them from the shaver.
®
®
Remington Titanium MicroScreen UltraModels
Which model is yours?
MS3-1700 Cordless operation,rechargeable with
indicator light.16 hour charge.
(1 LED)
Single voltage:120 volts AC,60 Hz.
MS3-2700 Cord and cordless operation,rechargeable
with charging and low battery indicator lights,
(2 LED's)
and 1-hour quick charge feature.
Worldwide voltage:100-240 volts AC,50-60 Hz.
MS3-3700 Cord and cordless operation,rechargeable
(7 LED's) with percentage of charge and low batter y
indicator lights,speed selector with turbo
indicator light,and 1-hour quick charge feature.
Worldwide voltage:100-240 volts AC,50-60 Hz.
MS3-4700 Cord and cordless operation,rechargeable
(LCD Display) with turbo switch and 1-hour quick charge
feature.Smart Shaver LCD with shaving
time remaining indication,low battery, turbo
indicator, cleaning and screen replacement icons.
Worldwide voltage:100-240 volts AC,50-60 Hz.