Stanley Smart Measure Pro Manual Del Usuario página 7

Installing Your Smart Measure Pro App
1. The Smart Measure Pro app is available
for download from the App Store or
Google Play.
2. On your device, launch the App Store or
Google Play.
3. Within the search box, search for Stanley
Smart Measure Pro.
4. Follow the instructions to download and install
the app on your device.
5. Once installed, the Smart Measure Pro app icon
will appear on your device's screen.
6. Proceed to Pairing Your Smart Measure Pro to
get started.
Pairing Your Smart Measure Pro
NOTE:
The LED indicator shows the status of your Smart
Measure Pro:
Blue flashing: Smart Measure Pro
discoverable over Bluetooth
Blue on: Smart Measure Pro connected to
device
Green flashing: Smart Measure Pro
charging
Green on: Smart Measure Pro fully
charged
Off: Power off
1. Turn on Bluetooth on your device.
2. On your Smart Measure Pro, press the Power
button.
• The LED indicator flashes blue indicating that
the Smart Measure Pro is discoverable over
Bluetooth.
• If the LED indicator remains off, Smart
Measure Pro may need charging.
3. On your device, tap on the Smart Measure
Pro app to launch it. The main menu should
appear after the app starts.
4. Tap the NO DEVICE CONNECTED button.
The app will display any nearby Smart Measure
Pro units available for pairing.
If no unit appears, ensure that the Smart
Measure Pro unit's LED indicator is flashing
blue (see Step 2).
5. When your Smart Measure Pro unit appears,
tap on it to pair it with your device.
This step is necessary the first time you use
Smart Measure Pro. For subsequent uses,
your Smart Measure Pro will automatically be
paired with your device.
Centering the Smart Measure Pro Laser
➊
➌ ➌
Settings Laser Calibration
6'9"
➋
X: 0
X: 5
Done
Y: 0
Before using your Smart Measure Pro, you need
to ensure that the laser is aligned with the
camera on your device. The Smart Measure Pro
Y: -15
9'1"
9'1"
Y: -15
X: 0
7