Troubleshooting - Krups BeerTender VB32 Manual Del Usuario

English

TROUBLESHOOTING

Problem
The appliance does not
come on.
You cannot position the
tap cover correctly.
No beer is being
dispensed.
You cannot close the
lid.
30
Possible causes
The appliance is not
connected to the mains
power supply.
The BeerTender Keg
tap has been activated
by hand.
The BeerTender Keg
tap or tube is not
inserted
correctly.
The BeerTender Keg is
empty.
There is no keg inside
the BeerTender
appliance.
The BeerTender
appliance tap handle is
not correctly installed/
positioned.
The tap cover has
not been positioned
correctly.
Remedies
Connect the appliance
to the power supply.
Put the BeerTender
Keg tap back in its
original position.
Remove the
BeerTender Keg tap
from the appliance and
fit it again following
section: Using the
BeerTender.
Replace the BeerTender
Keg with a new one.
Install a keg inside the
BeerTender appliance.
Install/position the
tap cover correctly.
Position the tap
cover correctly.