Charge The Battery Pack - Eureka 74 Guia Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Charge the Battery Pack

NOTE: Charge the cleaner for 10-12 hours before initial use. The batteries of a
new cleaner are on a low charge.
1 . Slide the cleaner up to snap it into
the wall bracket.
2. Plug the charger into an electrical
outlet.
It is all right to leave the cleaner on
continuous charge so it is always
ready to use. Unplug only if it will
not be in use for several weeks at a
time.
HOW TO USE
1. Push and hold the power switch
forward to turn on.
2. Release the switch. The cleaner
automatically turns off to save power
when it is not in use.
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the
cleaner operating at top efficiency. Empty the dust cup and clean the filter after each
use.
Empty Dust Cup
1. Push down on dust cup latch.
2. Pull dust cup from handle
section.
3. Shake contents into a waste
container.
4. Clean motor filter (refer to
motor filter section).
5. Press dust cup onto handle
section until they snap
together.
6
ON
OFF
1
2

Publicidad

Tabla de contenido
loading

Tabla de contenido