How To Maintain - Eureka 96 Guia Del Propietario

12
ENGLISH

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to
routine maintenance. Keep the cleaner operating at top
efficiency. Empty the dust cup after each use.
Empty Dust Cup
Step 1: Slide dust cup latch
Step 2: Pull dust cup
AA
the nozzle (Fig. 9).
O
AA
Step 3: Pull the filter E
AA
contents of dust cup into a waste container (Fig. 10).
Step 4: To replace dust cup
cup and fit dust cup into nozzle
Step 5: Gently squeeze the sections together until the dust
cup latch B locks the cup in place (Fig. 11).
AA
Clean Dust Cup Filter
Note: Do NOT operate cleaner without the filter in place.
Clean the dust cup filter as necessary (Fig. 12).
Step 1: Remove dust cup
Step 2: Pull dust cup filter
Step 3: Shake and brush the dust and dirt from filter
Step 4: If desired, launder the filter
filter in warm water using mild detergent.
Note: The dust cup filter is not dishwasher sate.
Do not put in dishwasher.
Step 5: Air dry thoroughly.
Step 6: Replace filter frame in dust cup
seal located at the top in firmly to ensure proper
filter performance.
E
AA
Replace a dirty or torn filter. Order additional dust cup
filter, part number 61544.
(CONTINUED)
up.
B
AA
from handle section and lift from
D
out of the dust cup D
AA
, reinstall filter
D
AA
O .
AA
.
D
AA
frame out of dust cup
E
AA
by hand. Wash
E
AA
by pushing the
D
AA
, shake
in dust
E
AA
.
D
AA
.
E
AA