Safety Warnings For Polishers - Truper PULA-7A3 Manual De Instrucciones

Safety warnings for
polishers
• Never have the car running when using the polisher in an
enclosed place.
• Before starting the polishing job, make a test. In the
event the tool makes strange sounds or vibrates in an
unusual way, please turn it off. Disconnect it and take it to
a Authorized Service Center.
• When not in service the tool shall be turned off and
disconnected.
• Prevent unexpected starting. Keep your fingers away
from the On /Off switch when connecting the tool into the
power outlet.
• To prevent electric shock, keep the tool dry and clean,
free of any oil or grease residue.
CAUTION
• Keep the power cable away from the
tool trajectory while polishing. Otherwise the disc can trap
and cut the cable exposing the user to electric shock.
• Do not force the tool. Hold it firmly by both handles. Do
not use force downwards, otherwise the tool movement
will slow down, reducing quality in the job and severely
damaging the tool.
• Take good care of the tool. The job is easier if it is in
good conditions.
WARNING
• Wear safety glasses.
ENGLISH 5