Parts; Assembly; Auxiliary Handle Assembly - Truper PULA-7A3 Manual De Instrucciones

Handle
Spindle
lock
Hook and loop
backing disc

Auxiliary handle assembly

• Align the auxiliary handle with the polisher head and
match the screw orifices.
• Screw firmly the auxiliary handle to the polisher head
using the included screws.
Disc Assembly
• Adhere the bonnet to the Hook and loop backing disc.
• Press the spindle lock (A) and mount the disc into the
polisher head. Screw it tight.
• To remove the disc, press the spindle lock and unscrew
the disc.
CAUTION • The spindle lock can only be
tightened when mounting or dismounting the disc. It shall
never be pressed to stop the disc while polishing.
Otherwise the tool may get damaged and exposes you to
personal injury.
6
ENGLISH
Speed Speed
control table
Auxiliary
handle
Carbon brush
housing cap (x2)
Polishing
bonnet

Assembly

Orifices to screw on
the auxiliary handle.
M14x2

Parts

Hook and loop
backing disc
Trigger Continuous
switch use button
A
Spindle
lock
Polishing
bonnet
Handle
Power cord
protector
Power
supply cable