Safety Standards For Finishing Sanders; Parts - Truper LIOR-1/2NX Instructivo

Safety Standards for
Finishing Sanders
CAUTION
• Observe all the applicable regulations
when sanding painted surfaces. Use special care when the
paint is lead based.
• Remove dust or any waste material to keep a safe work
environment. If possible, use a vacuum cleaner or dust
collection extractor.
CAUTION
• Every person in the work area shall wear
professional breathing masks to be protected against dust
and smoke generated when sanding.
• Do not use this machine to sand pieces containing
asbestos.
• After long periods running, the external metal parts and
accessories can get hot.
CAUTION
• Wear a
professional breathing mask and cartridges fit to work with
dust and vapors coming off paint. Regular masks do not
offer the type of protection needed.

Parts

Dust Collector
Receptacle
Front
Handle
brand
Front
Handle
Front
Handle Lock
Sanding
Pad
WARNING
not enter the work area.
WARNING
before sanding metal. Sparks can ignite the dust and
even the inner pouch.
• Do not use worn or broken sand paper.
• Do not touch the moving sand paper.
• Before you start sanding double check all foreign
objects like nails or screws have been removed from the
work piece.
WARNING
grasping surfaces. The sand paper could make contact
with its own power cable.
Contacting a power conducting cable energize the metal
parts of the tool and cause an electric shock to the
operator.
Switch
Sand Paper Speed
Brackets Control
Switch
Sand Paper
Brackets
Sand Paper
Hole Puncher
• Children and pregnant women shall
• Remove the dust collector pouch
• Hold the tool by the insulated
Handle
Extraction
Duct
Vacuum
Cleaner
Adaptor
ENGLISH
Power cord
protector
Power
Cord
Dust
5