Starting The Robot - domoova DRV100 Manual Del Usuario

EN
Operating the robot

Starting the robot

After attaching the cyclonic dustbin or vibrating water tank, switch
the robot on. Wait a few seconds to let it start up, then press the
AUTO button on the robot or on the remote control. The robot starts
its cleaning cycle in AUTO mode.
NOTE:
• If the robot is in standby mode, press the AUTO button on the robot or the re-
mote control once to come out of standby.
• The robot's cycle can be interrupted and it can be manually controlled using the
remote control.
Scheduling
With the daily schedule feature, the robot can start a cleaning cycle
at the time you choose every day of the week. You can reset the time
and scheduled times whenever you want via the remote control.
NOTE:
• All settings are lost when the remote control batteries are removed. Reset the
time and scheduled cleaning time as above.
• When the robot is switched off, the settings may be lost. The settings must
therefore be reset.
16