Harbor Breeze 40081 Manual De Usuario página 12

CLOSEMOUNT INSTRUCTION
WARNING: To reduce the risk of fire, electrical shock, or personal injury, wire connectors
provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from
the fan. If your house wire is larger than 12 gauges and there is more than one house wire to connect
to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION: Be sure the outlet box (not included) is properly grounded or that a ground (green or bare) wire
is present.
1. Connect with supply and mounting bracket (C) wires
according to the diagram and these steps:
• Connect the green wire from the mounting bracket
(C) to the Bare/Green (ground) supply wire.
• Connect the White wire from the mounting bracket
(C) to the White supply wire.
• Connect the Blue and Black wire from the mounting
bracket (C) to the Black supply wire.
• Secure all wiring connections together with wire
connectors (BB).

Note: The Black wire is hot power for the fan. The
White wire is common. The Blue wire is hot power
for light (sold separately; wiring instructions will
differ if optional light kit is purchased. Refer to light
kit manufacturer's instructions). The Green wire
is the ground. If house wires are different colors
than referred to above, stop immediately. It is
recommended a professional electrician determines
the proper wiring.
Hardware Used
BB
Wire Connector
2. Wrap electrical tape (not included) around each
individual wire connector (BB) down to the wire.
Hardware Used
BB
Wire Connector
3. Turn the spliced/taped wires upward and gently push
the wires and wire connectors (BB) into the outlet box.
WARNING: Ensure no bare wire or wire strands
are visible after making connections. Place the Black
and White wire connections on opposite sides of the
outlet box.
1
Mounting Bracket
2
BB
x 3
3
x 3
A
12
Lowes.com/harborbreeze
Black
White
Bare/Green
BB
BB
BB