Harbor Breeze 40081 Manual De Usuario página 8

INITIAL INSTALLATION
4. Remove the two mounting bracket screws (HH)
from the round holes of the canopy (B). Set aside
for later use. Detach mounting bracket (C) from
canopy (B).
Hardware Used
Mounting
HH
Bracket Screw
5. Feed black, blue and white wires up from the plug on
the mounting bracket (C) up through the hole in the
top.
6. Remove and discard the three rubber stoppers and
the five plastic spacers from the underside of the
motor assembly (E).
For Standard or Angle Mounting Instructions,
continue to page 9. For Closemount Instructions,
proceed to page 12.
4
x 2
B
5
C
6
Rubber
Stopper
8
Lowes.com/harborbreeze
C
HH
Plastic
Spacer
E