Care And Maintenance; Troubleshooting - Harbor Breeze 00724 Manual De Usuario

CARE AND MAINTENANCE

IMPORTANT: Shut the main power supply off before beginning any maintenance.
• DO NOT use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
• Clean the fan housing using a soft bristle brush or lint-free cloth to avoid scratching the finish.
Clean the blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish
to the blades for added protection.
• Al least twice a year, tighten all the screws and lower the canopy to check the mounting bracket
screws and downrod assembly.
• Battery replacement: Use an A23 12-volt alkaline battery for the remote control.
• Total fixture wattage is 17.5 watts; do not attempt to replace LEDs.
12

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Fan blades do not 1. The power is off or the fuse is
move. blown.
Noisy operation. 1. Blades are loose.
2. Cracked blade.
Excessive wobbling. 1. The blades are loose.
2. The fan is not securely mounted
Remote control 1. No sound after the fan power is
malfunction. on.
2. No flash on transmitter LED.
3. The remote control does not
work.
CORRECTIVE ACTION
1. Turn the power on or check fuse.
2. Turn power off. Loosen motor
housing; check all the connec-
tions.
1. Tighten all blade screws.
2. Replace blades (call customer
service).
1. Tighten all blade screws.
2. Turn power off. Carefully loosen
the canopy and remount securely.
1. Please check if the power supply
is connected properly and main
power is on.
2. Please check if the battery is
installed into the remote control.
Make sure the battery is installed
properly. One side of the battery is
positive and the other is negative.
3. Sync the remote control to the
receiver following the steps
described in step 1 on page 11.
Make sure power to the fan is
off before beginning the sync
process.
13