Activating/Deactivating The Pilot Tone Transmission; Activating/Deactivating The Lock Mode; Exiting The Operating Menu - Sennheiser ew 500 G2 Serie Instrucciones Para El Uso

remains unchanged. After the reset, the transmitter is
restarted and the standard display is shown on the display
panel.
Activating/deactivating the pilot tone
transmission –
Via the "PILOT" menu, you can activate or deactivate the
pilot tone transmisssion.
The pilot tone supports the receiver's squelch function
(Squelch) and protects against interference due to RF
signals from other units. The transmitter adds an inaudible
signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone.
Transmitters of the ew 500 series (first generation) do not
transmit a pilot tone and the receivers of the ew 500 series
(first generation) cannot evaluate the pilot tone.
Nevertheless, you can combine the transmitter with a
receiver of the first generation by observing the following:
With the ew 500 G2 transmitter and an ew 500 G2
receiver:
Activate the pilot tone function with both transmitter
and receiver.
With the ew 500 G2 transmitter and an ew 500 receiver
or vice versa:
Deactivate the pilot tone function with the ew 500 G2
transmitter or receiver.
Activating/deactivating the lock mode –
Via the "LOCK" menu, you can activate or deactivate the
lock mode.
The lock mode prevents that the transmitter is accidentally
programmed or switched off during operation. The lock
mode icon
activated.
To deactivate the lock mode, first press the
then press the
you confirm your selection by pressing the
buttons can be operated as usual.
Exiting the operating menu –
Via the "EXIT" menu, you can exit the operating menu and
return to the standard display.
PILOT
on the display indicates that the lock mode is
/ rocker button to select "LOC.OFF". If
LOCK
SET button and
SET button, the
EXIT
23