Cisco Linksys NMH300 Manual De Usuario página 19

17.
Make sure the connectors on the
hard disk drive face down so they
can be seen from the bottom of the
drive bay . Also make sure the screw
holes of the hard disk drive line up
with the screw holes of the drive
bay . Then insert the hard disk drive
into the drive bay .
Click Next .
NOTE:
If you are using a low-profile or half-height hard disk drive, then
use the four included screws to secure the hard disk drive in its drive bay .
18.
Position the Media Hub so you are
facing the back of the Media Hub .
With the hard disk drive's label
facing the left side of the Media
Hub, slide the drive into the empty
slot . Push down on the hard disk
drive until it snaps into place .
Click Next .
NOTE:
If you are installing a second hard disk drive now, repeat the
previous installation steps .
19.
Replace the cover, and push it down
to secure it .
Click Next .
Media Hub
15