Cisco Linksys NMH300 Manual De Usuario página 8

11.
To remove the drive bay cover, push
the button on the top of the Media
Hub .
Click Next .
12.
To remove the empty drive bay,
push together its clips and pull out
the drive bay .
Click Next .
13.
Make sure the connectors on the
hard disk drive face down so they
can be seen from the bottom of the
drive bay . Also make sure the screw
holes of the hard disk drive line up
with the screw holes of the drive
bay . Then insert the hard disk drive
into the drive bay .
Click Next .
NOTE:
use the four included screws to secure the hard disk drive in its drive bay .
4
If you are using a low-profile or half-height hard disk drive, then
Media Hub