Cisco Linksys NMH300 Manual De Usuario página 7

7.
You can use a new or previously
used hard disk drive . If you use a
previously used hard disk drive, all
data on that drive will be erased
during installation . If you want to
keep any of the data, back up the
drive before you continue with the
Setup Wizard .
Click Next .
8.
The following steps will describe
how to install the hard disk drive .
Click Next .
9.
If the Media Hub is powered on,
press and hold down the Power
button until the LED turns off .
Click Next .
10.
Disconnect the power adapter from
the back of the Media Hub .
Click Next .
Media Hub
3