Setup Of Additional Computers; Tools; Remote Access - Cisco Linksys NMH300 Manual De Usuario

Setup of Additional Computers

To set up additional computers for access to the Media Hub, run the Setup Wizard .
On the Welcome screen, click Connect Computers and follow the on-screen
instructions . For a step-by-step explanation, refer back to the Windows Installation
section (step 27 on page 8) or the Mac Installation section (step 32 on page 19) .

Tools

The Media Hub offers different ways to take advantage of its features .
Video Player Support
The Media Hub plays video content through a browser plug-in . Download and
install your favorite media player to enable video playback within the Media
Browser . Please note that media players have varying levels of support for different
video formats . If the video format you want to play is not supported, you may want
to search the Internet for a media player that can run on your computer and support
the desired video formats . (Make sure you download the latest version .) Some
suggested players include QuickTime, VLC, and Windows Media Player .
For more information about video support, visit www.linksysbycisco.com/support

Remote Access

If you enable and set up the Remote Access service
Hub and its files over the Internet . To set up the Remote Access service, follow these
instructions:
1 . Windows: In your web browser,
enter http://<Friendly_Name>
(Example: http://mediahub)
Mac: In your web browser, enter
http://<Friendly_Name>.local
(Example: http://mediahub .local)
2 . Click Configuration .
A period of Remote Access is included from date of activation . Fees may apply thereafter and
†
are subject to change . Go to www.linksysbycisco.com for further information and details of
terms and conditions applicable to the Remote Access service .
Media Hub
, then you can access the Media
†
21