Memory Management - DeFelsko PosiTector SPG Guía Rápida

HiLo Alarm
Allows Gage to visibly and audibly alert the user when readings
exceed user-specified limits.
The PosiTector SPG has internal memory storage for recording
measurement data. Stored measurements can be reviewed
on-screen or accessed via computers, tablets and smart phones.
All stored measurements are date and time-stamped.
symbol appears when the Gage is set to store measurement data.
Standard models
batches. "New Batch" closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both the (-) and ( + ) buttons at any time to capture and save
an image copy of the current display. The last 10 screen captures
are stored in memory and can be accessed when connected to a
computer (see PosiSoft USB Drive, pg. 6).
SmartBatch™
This menu option sets up the PosiTector SPG to comply with
various standards and test methods published by organizations
including ASTM, SSPC, ISO, IMO, US Navy, SANS and AS.
For instructions on how to use the Smart Batch™ feature, see
www.defelsko.com/smartbatch
– Average
– Maximum Value

Memory Management

store up to 250 readings in one batch.
store 100,000 readings in up to 1,000
– Standard Deviation
– Minimum Value
5
The
Create a new batch
(Advanced only)
Restore brightness
after dimming