Beurer UB 190 CosyNight Instrucciones De Uso página 20

WARNING
If the heated underblanket is being used over several hours, we rec-
ommend that you set or program the lowest temperature setting on the
control to avoid overheating the person using the blanket.
Selecting automatic switch-off time
Press the button to set the automatic switch-off time [4]. You can set the automatic switch-off time to 1, 2,
3, 4, etc. up to 12 hours.
NOTE
Switching sequence of the automatic switch-off time:
1 h – 12 h – 11 h – 10 h – 9 h etc. 1 h – 12 h – 11 h etc. (time in hours).
If the time remaining is under an hour it is shown in minutes (e.g. 59 min.)
The heated underblanket is automatically switched off once the set switch-off time has elapsed.
The following is then shown in the display:
Temperature setting for body area: 0
Temperature setting for foot area:
Automatic switch-off time:
To switch on the heated underblanket again, press either the button to set the temperature setting for the
body area [3] and/or for the foot area [5].
If you do not want to use the heated underblanket beyond the selected switch-off time, slide the ON/OFF/
REMOTE switch to the OFF (0) position to switch off the heated underblanket.
Switching off
To switch off the heated underblanket, slide the ON/OFF/REMOTE switch on the control to the OFF (0) position.
When switched off, the illumination and the display are turned off.
NOTE
If the heated underblanket is not being used for several days, set the ON/OFF/REMOTE switch to the
OFF (0) position and remove the mains plug from the socket.
ECO Control
Temperature settings 1, 2, 3 and 4 are particularly energy-saving. If these temperature settings
are selected, the "ECO" symbol appears on the display.
kWh display
Press the "kWh" [7] button to display the current power consumption in kWh.
The power consumed since the last switch-on is displayed.
Due to the low power consumption in the "ECO" temperature settings, the displayed value (power consump-
tion in kWh) takes a while to change.
NOTE
A healthy sleeping environment can be achieved by keeping the bedroom cool and pre-heating your
bed shortly before going to bed. Lower heating costs for the bedroom also create further cost savings.
0
0
20
CONTROL