Important Hints - Blumfeldt 10029146 Manual Del Usuario

Assembly instructions::
• Ideally, assembly should be performed with two people
• You will need a stable Phillips screwdriver or preferably a cordless screwdriver with good (new)
cross bits
• Please set your electric screwdriver to a medium torque to prevent over-revving the screw head
• Start by turning all the screws only 2/3 of the way in - tighten fully only after all screws have been
prefixed
Care instructions:
• For weather protection, a film under the mesh of the roof is attached that protects against rain. On
the bench, the attached material is waterproof.
• Material which is firmly fixed to the beach chair may be cleaned with pure water or a mild soapy
solution when dirty. Removable materials may be washed in the washing machine under the 'easy
care up to 40°' setting.
• To care for the wood, you may treat with clear varnish aftertreatment at least once a year or as
needed
Step 1: Construction of the lower rack
7

Important Hints

Assembly
To begin, please connect
the front panel (1) with
the lower box (2). Use the
connection rods (3) with
tongue and groove.
Next screw the front and lo-
wer box with flat slats (3).
Use 2 screws for each (C).
Now push the footboard (4)
to the front side so that the
closed side of the footboard
is facing forward.
Important: without the con-
nection rods the bench will
break.
Please make sure that the
front panel is vertical.
Next mount the side panels
(5) with 7 screws (A) to the
base. 2 screws are fixed to
the footboard and 5 at the
base construction.