Caring For Your Blood Pressure Monitor - Oregon Scientific BPU321OS Manual De Usuario

• If you are taking medication, consult your physician
to determine the most appropriate time to measure
your blood pressure. Never change a prescribed medi
cation without consulting your physician.
• This unit is not suitable for continuous monitoring
during medical emergencies or operations.
• If the cuff pressure exceeds 40 kPa (300 mmHg), the
unit will automatically deflate. Should the cuff not def
late when pressures exceeds 40 kPa (300mmHg),
detach the cuff from the upper arm and press the
button to stop inflation.
• To avoid measurement errors, carefully read this
manual before using the product.
• The continuous cuff pressure due to connection tubing
kinking may cause blood flow interference and harmful
injury to the patient.
• Frequent measurements can cause injury to the patient
due to blood flow interference.
• Do not apply a cuff over a wound, as this can cause
further injury.
• The application of the cuff on any limb where
intravascular access or therapy, or an arterio-venous
(A-V) shunt may cause temporary interference to blood
flow and could result in injury to the patient.
• The application of the cuff and its pressurization on
the arm should be on the side of a mastectomy;
• Pressurization of the cuff can temporarily cause loss
of function of simultaneously used monitoring ME
EQUIPMENT on the same limb.
• You need to check that operation of the blood pressure
monitor does not result in prolonged impairment of
patient blood circulation
• Do not use this monitor close to any magnetic
resonance imaging (MRI) equipment. If MRI is to be
performed, remove cuff from the arm.
CaRINg FOR YOUR BLOOD PRESSURE
MONITOR
To ensure you receive the maximum benefit from using
this product, please observe the following care guidelines.
• When not in use, store the unit in a dry place away
from direct sunlight.
• Do not immerse the unit in water. If it comes in contact
with water, dry it immediately with a soft lint-free cloth.
• Carefully remove dirt from the unit or cuff with a
soft, slightly moistened cloth. Do not use abrasive or
corrosive cleaning detergent, such as petrol,thinners
or similar solvents, as these may cause damage.
• Do not wash the arm cuff or immerse it in water.
Position the arm cuff in ventilated and dry place, not
under direct sunlight.
• Carefully remove spots on the cuff with a damp cloth
and soapsuds.
• Remove the batteries whenever you are planning to
store the unit for a long period of time.
• When replacing batteries, use new batteries as specified
in this user manual. Do not mix new and old batteries.
• Do not place objects such as stickers on the upper arm
cuff or unit, as these may impair the measurement.
• Do not subject the unit to excessive force, shock,
dust, temperature changes, or humidity. Such treat
ment may result in malfunction, a shorter electronic
life span, damaged batteries, or distorted parts.
• Do not tamper with the internal components. Doing
so will terminate the product warranty and may
cause damage.
• The unit contains no user- serviceable parts.
• If you no longer need to use this product, protect the
environment by bringing it to your dealer or desig nated
collection point for proper disposal.
13