Electromagnetic Compatibility Descriptions - Oregon Scientific BPU321OS Manual De Usuario

Dimensions
Dimensions 148 x 103 x 75 mm
L x W x H (5.8 x 4.1 x 3.0 in)
Weight 450g
Cuff circumference 22-32 cm
Transmission range 6 meters (19.7 feet)
Measuring range
30 to 280 mmHg
Pressure
(4.0 to 37.3 kPa)
Pulse 40 to 199 pulse/min
Power
4 x UM-3 (AA) 1.5V batteries
Power supply 6V adaptor (separate
purchase required)
Auto power off after 1 minute
Power save of no key press or after
synchronisation attempt
Operating environment
10°C to 40°C
Operation
(50°F to 104°F)
-20°C to 60°C
Storage
(-4°F to 140°F)
Humidity 10% to 83% relative humidity
ELECTROMagNETIC COMPaTIBILITY
DESCRIPTIONS
TaBLE1: gUIDaNCE aND MaNUFaCTURER'S
DECLaRaTION – ELECTROMagNETIC EMISSION –
FOR aLL EQUIPMENT aND SYSTEMS
guidance and manufacturer's declaration –
1
electromagnetic emission
The BPU321OS Blood Pressure Monitor is intended
for use in the electromagnetic environment specified
2 below. The customer or the user of BPU321OS
Blood Pressure Monitor should assure that it is used
in such an environment.
3 Emissions test Compliance
RF emissions
4
CISPR 11
16
Electromagnetic
environment - guidance
The BPU321OS Blood
Pressure Monitor uses
RF energy only for
its internal function.
Therefore, its RF
Group 1
emissions are very low
and are not likely to
cause any interference
in nearby electronic
equipment.