Installing And Replacing The Batteries; Monitor Settings - Oregon Scientific BPU321OS Manual De Usuario

INSTaLLINg aND REPLaCINg
THE BaTTERIES
This monitor can work with a 6V adaptor which has to be
purchased separately.
1. Slide off the battery cover.
2. Install the batteries by matching the correctpolarities.
Always use the correct battery
3. Align the cover flat against the battery compartment,
and then slide it upwards.
Above diagram displays:
1. Air outlet
2. B attery compartment
Flashing indicates monitor batteries are low.
NOTE
Replace batteries promptly to ensure accurate
NOTE
readings. Replace all the batteries at the same time; it is
dangerous to mix old and new batteries.
NOTE
instructions on how to dispose of used batteries. Used
batteries can be harmful to the environment, and should
not be thrown out with household trash.

MONITOR SETTINgS

IMPORTaNT As blood pressure measurements are
recorded in the memory with date and time stamp for
easy analysis, set the monitor prior to first use to ensure
measurements are correctly marked.
To set the monitor:
When monitor is off, press and hold
•
setting mode.
1
2
Settings
audio
function
5
Contact your local waste disposal authority for
Setting options (Press
to adjust the value, and press
to confirm)
Date Year, month, date
Time Hour format, hour, minute
On / off
Volume control (HI / Lo) when
function enabled
Language:
(En) English
(Fr) French
(CH) Putonghua
(CH Hk) Cantonese
(SP) Spanish
to enter
or