Manual Operation (Without Remote) - Giatsu AROMA 2 R32 Manual De Usuario

Manual Operation (Without Remote)

How to operate your unit without
the remote control
In the event that your remote control fails to
work, your unit can be operated manually
with the MANUAL CONTROL button
located on the indoor unit. Note that manual
operation is not a long-term solution, and
that operating the unit with your remote
control is strongly recommended.
BEFORE MANUAL OPERATION
Unit must be turned off before
manual operation.
To operate your unit manually:
1. Open the front panel of the indoor unit.
2. Locate the MANUAL CONTROL button on
the right-hand side of the unit.
3. Press the MANUAL CONTROL button one
time to activate FORCED AUTO mode.
4. Press the MANUAL CONTROL again
to activate FORCED COOLING mode.
5. Press the MANUAL CONTROL button a
third time to turn the unit off.
6. Close the front panel.
Page 11


CAUTION
The manual button is intended for testing
purposes and emergency operation only.
Please do not use this function unless the
remote is lost and it is absolutely necessary.
To restore regular operation, use the remote
control to activate the unit.
33
2
Manual control button