Functional Description - Black and Decker FireStorm FS100L Manual De Instrucciones

EXTENSION CORDS
WARNING:
Use proper extension cords. Make sure your extension cord is in good condition and is a 3-wire extension
cord which has a 3-prong grounding type plug and matching receptacle which will accept the machine's plug. When using an
extension cord, be sure to use one heavy enough to carry the current of the machine. An undersized cord will cause a drop in
line voltage, resulting in loss of power and overheating. Fig. C, shows the correct gauge to use depending on the cord length.
If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.
FOREWORD
FS100L is a 10 in. Compound Power Miter Saw designed to cut wood, plastic, and aluminum. Compound angle and bevel
cutting are easy and accurate. It can crosscut up to 5-5/8 in. x 2-3/4 in., miter at 45° both left and right up to 4 in. x 2-3/4 in.,
bevel at 45° left up to 5-5/8 in. x 1-5/8 in., and compound 45° x 45°,4 in. x 1-5/8 in.. It has positive miter stops at 0°, 22.5°,
31.62°, and 45° both left and right, and bevel stops at 0° and 45° adjustable. A dust bag is included to catch fine dust and wood
chips.
Minimum Gage for Cord Sets
Volts Total Length of Cord in Feet
120V 0-25 26-50
(0-7,6m) (7,6-15,2m) (15,2-30,4m) (30,4-45,7m)
240V 0-50 51-100
(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)
Ampere Rating
More Not more American Wire Gage
Than Than
0 - 6 18 16
6 - 10 18 16
10 - 12 16 16
12 - 16 14 12

FUNCTIONAL DESCRIPTION

12
51-100 101-150
101-200 201-300
Fig. C
16 14
14 12
14 12
Not Recommended