Rollei Steady Butler Mobile Manual De Usuario página 10

4. Mount the Smartphone
10
NOTE: The home button of the smartphone should be at the side
near to the pitch motor . Please ensure that the smartphone is fixed
tightly in order to avoid shaking of the gimbal .
Please make sure that the gimbal is turned off before the smart-
phone is mounted . We highly recommend to remove the phone case .
You can manually rotate the phone clamp to take photos & videos
in vertical mode .
5. Balancing the Smartphone
If the gimbal is turned on and the smartphone is balanced / levelled
correctly, it will be held by the gimbal without making any sounds or
any shakes . In that case the smartphone is positioned correctly .
ENGLISH
To adjust the smartphone gravity center,
slide the arm until it is balanced on the tilt
axis to ensure the best stabilizing status
and enduration time .
If the gimbal is turned on and the smartphone is balanced / levelled
correctly, it will be held by the gimbal without making any sounds or
any shakes . In that case the smartphone is positioned correctly .
6. Operation Instruction
B
A A
2
1
3
B
Mode Button Working
Operation Modes
Single click Pan
Following
Double click Pan& Tilt
Following
Triple click All Locked Flashes three
Quartic click All
Following
Long Press for Calibration Solid on
6 Seconds
Panning right/ left
A
B Tilting up/ down
Zoom in/ out & Focus
1
(Setting in the app)
2 Mode Button
ON/OFF (long press for about
3
3 seconds)
Shutter Button
• Press once: Take a photo
• Press twice: Start a video
Indication Instruction
Light
Flashes once Default mode, tilt & roll
(quick flash) axis are both locked,
camera can move to
left or right smoothly .
Flashes Roll axis is locked,
twice camera can move to
the left/right, and tilt
up/down .
The camera stays in its
times current orientation /
position .
Flashes once Tilt axis, roll axis
(slow flash) and pan axis are all
following
Tilt or roll angle not
levelled with horizontal
surface, or pan angle
drift in lock mode .