Amana Easy Reach Plus Serie Guía De Uso Y Cuidado página 8

Tabla de contenido

Publicidad

Installation
Freezer Handles
Partial-Width Handle
Materials Needed:
• Phillips screwdriver
To Install:
1. Install handle by fastening with
screws removed from edge of door.
• If reversing freezer door, remove
door plugs from top edge of door
and insert into screw holes.
To Remove:
1. Remove handle screws with Phillips
screwdriver and retain screws for
later use.
Front Mount Plastic Freezer Handle
Notes:
• There is a slight curve to
this style of freezer handle.
• For proper installation, be
sure handle is oriented as
shown.
7
To Install:
1. Align door handle
clips to the studs
attached to the
freezer door.
2. Ensure the large
hole in the
mounting clip is
positioned to the
right on both ends
of the handle.
3. Rotate the handle so that the handle is flat against
the door.
4. Grasp the handle firmly and slide handle to the
right.
To Remove:
1. With both hands, firmly grasp the handle toward
the right side.
2. Slide toward the left, lift and remove from the
surface.
Handle
Door Stud
Clip
Handle
Base

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Easy reach plus abr2527fes

Tabla de contenido