Care And Maintenance; Exchange Of Fuses - Dreve Drufomat scan Instrucciones De Trabajo

11. Care and maintenance

Generally disconnect the unit from
mains supply before executing care
and maintenance.
Ideally cleaning is to be effected dryly
with a soft piece of cloth, if necessary

12. Exchange of fuses

Separate power cord from the mains.
The fuse housing is to be found on the
left back side of the unit.
In order to exchange the fuse press the
locking cap slightly inside and turn it to
the left in accordance with the arrow.
Take out fuse carrier. Pull the defect
fuse carefully out of the clamp and
replace it by a new one.
with a slightly humid sponge and a mild
cleaning liquid. Water and cleaning
liquids must not get into the unit.
The O-rings should be greased regularly
with silicone grease.
Attention: Only use the fuses
indicated on the back of the
unit.
Insert fuse carrier again and push it
slightly to the right.
47 47