System Installation - Akron STYLE 9323 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

PANEL
2-3/4"
ELECTRICAL CONNECTOR
Style 9323 Navigator Pro Display Navigator Pro Electric Valve

5 SYSTEM INSTALLATION

The style 9323 controller can be installed in a number of different system configurations and has been designed to
provide the installer with flexibility during installation . Refer to appendix for more details on connector and harness part
numbers .
One to One Installation
The Navigator Pro system can be installed so that there is one display and one valve connected directly with nothing else
on the network . Harnesses are available from the factory if desired . They can also be made using standard Deutsch con-
nectors and the pin-out information in the ELECTRICAL INSTALLATION section of the manual .
Network Installation
The Navigator Pro system can also be installed in a networked configuration . Since the system operates on a CAN
protocol, as long as the valve is on the network, it can be paired with the appropriate 9323(s) (see ASSIGNING A VALVE
section
Page 03