Ampro Neo RDM Tester Manual De Usuario página 10

11. CHANNEL TRACER
This function is used to test dmx signal stability.
Using LEFT/RIGHT button to select the function;
Using Enter button to activate the function.
Start/Stop
Clear ERR
Compare Limit
Time.......XX:XX:XX.X
Time no Signal...XX:XX:XX.X
Framing Errors....XXX
Channel of CHS.....XXX
Channel with ERR.......XXX
Channel Received......XXX
Press up/down buttons to check different error
channels counter.
P. 10
Neo RDM Tester - English version
Start or stop the test
Clear the error data
Allowable limit of signal jump
The total time of the test
No signal time during the test
Framing errors counts
Channel value errors counter
Error channel counter
DMX channels number