Touch Screen Calibration - Ampro Neo RDM Tester Manual De Usuario

5. TOUCH SCREEN CALIBRATION

In the OPTIONS menu to setting the parameters.
When the touch screen does not reflect correctly,
choose touch screen calibration function. Please
click the four dots per the guidance words to cali-
brate the screen sensitivity. If the error is big, the
calibration will be fail. Please calibrate again.
6. DMX RECEIVE
Under this function, the unit will receive DMX
signals and show the DMX in status, every channel
current value, maximum value and minimum value.
Using UP/DOWN/LEFT/RIGHT button to select the
channel you want to check, using ENTER button or
OPTION menu (in the down-right corner) to activate
OPTION menu.
• Store the current received dmx data into SD
card as a scene.
• Change the data display style (percentage,
decimal, hexadecimal).
• Change the visible dmx address range (all of
addresses, valid data address).
• Clear the current value maximum value and
minimum value, and restart check the dmx
signals.
P. 5
English version - Neo RDM Tester