Power Supply; Power Off - Ampro Neo RDM Tester Manual De Usuario

2. POWER SUPPLY

Power On
Under battery power supply, long press menu but-
ton to power on. Under USB power supply, connect-
ing the cable to power on directly.

Power Off

Under battery power supply, long press menu
button, the power off message box will pop up,
then release menu button to power off. Under usb
power supply, disconnecting the cable to power off
directly.
Switch over power system
From battery to USB power supply, please connect
the USB cable directly. But the precondition is that
the USB voltage is 5V, current is higher than 200mA.
From USB to battery power supply, please press
menu button and disconnect USB cable, when the
power symbol is no longer USB, release the button
to finish.
P. 3
English version - Neo RDM Tester