Measuring; Photometry - Auxilab 4260/50 Manual De Usuario

Put the Reference in the light path, press
Measure Samples
Put the samples in the light path, press
Print the Test Results
PRIN T
Press to print the test results.
Store the Test Results
S AVE
Press to store the test results, input the file name by numeric
EN TER
keys and press
will save in the USB Disk, or the data will save in the internal memory.
Load the Stored File
In the test interface, press
press , to choose the file you want, press
USB Disk was installed, the data will open from the USB Disk, or the
data will open from the internal memory.
Select Bandwidth
Main menu, press

Measuring

8. Photometry

Step 1. Start Photometry
Main menu, press numeric key
EN TER
then press
to save. If the USB Disk was installed, the data
OPEN
8
TUV
, press ,
.
1 0 0 %T
o AB S to do blank.
S TART
S TOP
to measure.
to go into file selecting interface,
to choose the Bandwidth, press
1
or , to choose "Basic Mode",
EN TER
to open. If the
EN TER
.