Pfaff 948/51 Complemento De Las Instrucciones De Servicio Y Lista De Pizas página 10

GB
1 Selecting and altering parameters
.06
● Press and hold key PE and TE simultaneously.
● Switch on the machine.
● Press the Parameter input key (LED on).
● By pressing +/- on the P key select the desired group, e.g. "200".
● By pressing +/- on the S key select the desired parameter, e.g. "252".
● Set the desired value (e.g. clearance under puller roller) by pressing +/- (key L).
● Save the input by ending the parameter input (LED off).
10
104 8
206 II
252 25