Avaya WLAN Handset 6120 Manual Del Usuario página 11

Single Charger
Place the Handset in the Single Charger facing forward.
While the Handset is charging in standby mode, it will display
its extension number and Charging... as well as an ani-
mated Battery Icon in the display's upper right corner. The
Handset is fully operational and will ring if called. When the
Handset is charging while turned off, only Charging... and
the animated Battery Icon will display and no calls will be
received. Note that during the Handset charging cycle, the
Charging... dots will be racing.
When the Handset is fully charged, Charge Complete will
display.
Dual Charger
Place the Handset in the front slot, facing forward. The Bat-
tery Pack alone snaps into the charging bay.
The LED indicates the status of the Battery Pack in the rear
bay. The Handset displays its charging status as described
for the Single Charger.
When the Handset is fully charged or is removed, the Battery
Pack will begin charging.
NOTE: The front slot takes precedence. If a discharged
Handset is placed in the front slot while a Battery Pack is
charging in the rear slot, the Charger will switch to the Hand-
set, only returning to the Battery Pack when the Handset is
fully charged or removed, thus extending the length of time it
takes to charge the Battery Pack.
Quad Charger
Only Battery Packs, not Handsets, are charged in the Quad
Charger. The Quad Charger will charge up to four Battery
Packs simultaneously. The Battery Pack snaps into the
charging slot. The LED above the occupied bay indicates the
charging status of the Battery Pack in the bay.
English 11