Pre-Start Checks; Start And Stop Procedure - Altrad Belle PRO TROWEL 900 Manual Del Operador

GB
Pre start-up inspection.
3. Check the engine oil level and top up as necessary.
4. Check the engine fuel level and top up as necessary.
GB
WARNING
Honda GX160 & GX270
to the left.
3. Turn the engine ON / OFF switch clockwise to the 'I' position.
4. Set the throttle to the idle position by moving the throttle lever fully to the right. Do
not start the engine on full throttle.
anti clockwise to the 'O' position.

Pre-start Checks

Start and Stop Procedure

ON/OFF lever fully to the right.
OFF position by moving it to the right.
30
ON if not
Throttle Lever
Choke Lever
Fuel ON/OFF
Lever.
ON/OFF switch