Altrad Belle PRO TROWEL 900 Manual Del Operador página 46

Problem
Engine will not start.
Rolling Concrete.
Bouncing.
Troubleshooting Guide
Cause
No fuel.
Spark plug fouled.
Engine cold.
Cutout Switch in OFF position.
Spider Plate
Remedy
Open fuel tap.
Fill fuel tank .
Clean and reset plug gap.
Close choke.
Move Cutout Switch to ON position.
shaft of the gearbox.
Check Spider plate for bent trowel arms. If one is bent
replace it.
Blades should be of the same measurement / dimension and
Excessively worn blades should not be used.
46