Temperature Display; Battery Replacement; Troubleshooting - TFA 98.1030 Instrucciones Para El Manejo

Reloj despertador radiocontrolado con termómetro
Ocultar thumbs Ver también para 98.1030:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
TFA_No. 98.1030_Anleit_07_16
Radio-controlled alarm clock
with thermometer
• Press "AL ON/OFF" button to switch alarm
on or off. If it is on, " " is shown on the
LCD.
• When alarming, press any button to stop
the alarm.
• Press "SNOOZE/LIGHT" button when alarm-
ing to activate the snooze alarm. The alarm
will stop for 8 minutes, then it alarms again.

7.4 Temperature display

• Press "-(C/F)"- button to change between
°C or °F as temperature unit.
8. Backlight
• Press the top button "SNOOZE/LIGHT". The
backlight will light for 5 seconds.
9. Care and maintenance
• Clean it with a soft damp cloth. Do not use
solvents or scouring agents.
• Remove the batteries if you do not use the
product for a lengthy period.
• Keep the instrument in a dry place.

9.1 Battery replacement

• Replace the batteries when the display
becomes weak or the alarm level declines.

10. Troubleshooting

Problems
No indication
No DCF reception
18
02.08.2016
Solution
➜ Ensure batteries
polarities are correct
➜ Replace the batteries
➜ Press and hold the
"+(12/24)"- button
and "-(C/F)"- button
for 3 seconds
15:48 Uhr
Seite 10
Radio-controlled alarm clock
with thermometer
➜ Wait for attempted
➜ Choose another place
➜ Check if there is any
➜ Restart the device
➜ Set the clock manually
➜ Replace the batteries
Incorrect indication
If your device fails to work despite these meas-
ures contact the supplier from whom you pur-
chased it.
11. Waste disposal
This product has been manufactured using
high-grade materials and components which
can be recycled and reused.
Never dispose of empty batteries
and rechargeable batteries in
household waste.
As a consumer, you are legally
required to take them to your
retail store or to appropriate col-
lection
sites
national or local regulations in
order to protect the environ-
ment.
The symbols for the heavy metals
contained are:
Cd=cadmium, Hg=mercury,
Pb=lead
This instrument is labelled in
accordance with the EU Waste
Electrical and Electronic Equip-
ment Directive (WEEE).
reception during the
night
for the instrument
source of interference
according to the
manual
depending
on
19

Publicidad

Tabla de contenido
loading

Tabla de contenido