Temperature Display; Time Display - TFA 60.2514 Instrucciones De Uso

TFA_No. 60.2514_Anleit_02_13
Radio-controlled alarm clock with thermometer
7.5 Dual time setting
• Press the MODE button three times in normal mode.
• DUAL and 00:00 appear on the display.
• Press and hold the MODE button and the hour indicator flashes.
• Press the "+" or "-" button to adjust the hour.
• Confirm with the MODE button.
• Set minutes in the same way.
• Press the MODE button again.
• Press the MODE button again to return to normal mode.
7.6 Backlight
• Press the LIGHT/SNOOZE button. The backlight will come on for
5 seconds.
7.7 Night light
• As soon as the batteries are inserted, the night light for the display
is activated.
• appears on the display.
• The unit is provided with a light sensor to turn on the light auto-
matically in the dark.
• Press LIGHT/SNOOZE button for 5 seconds and the function is de-
actived.
• disappears on the display.

7.8 Temperature display

• Press the °C/°F button to change between °C (Celsius) or °F (Fahren-
heit) as the temperature unit.
22
05.02.2013 14:57 Uhr Seite 12
Radio-controlled alarm clock with thermometer

7.9 Time display

• Press the "+" button to choose between the 12 HR system (AM/PM
appears on the display) or the 24 HR system.
8. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring
agents. Protect from moisture.
• Remove the batteries if you do not use the clock for a lengthy
period.
• Keep the clock in a dry place.
8.1 Battery replacementl
• Replace the batteries when the display starts to fade or the alarm
tone declines.
• Open the battery compartment at the bottom of the clock and
insert two new 1.5 V AA batteries, making sure the polarity is cor-
rect. Close the battery compartment again.
9. Faults
Problem Solution
➜ Ensure battery polarity is correct
No display
➜ Change batteries
23