Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4.
Unlock the lid by turning it counterclockwise, then carefully lift the lid away from
your face. The steam coming out from the pressure cooker will be hot.
NOTE:
• For your safety, open the lid slowly. Do not open the lid before all pressure has
escaped through the exhaust valve and the float valve has completely fallen back
into the lid.
• DO NOT press the pressure release button if your food is in a liquid state (e.g.
porridge or soup). Pressing the pressure release button immediately after cooking
liquid foods may result in food spraying out via the pressure release valve. When
cooking such foods, allow extra time for the food to cool down after cooking and
before serving.
• Some recipes may call for a quick release. To quick release pressure, press the
pressure release button immediately after cooking. Use caution as steam will be hot.
Care & Maintenance
1.
Unplug the power cord and allow pressure cooker to completely cool before
cleaning.
2.
Wipe the housing of the pressure cooker with a clean cloth. Do not immerse the
cooker into water or spray with water.
3.
Remove water collection cup and pour out any excess water inside. Clean
collection cup with a damp towel and place it back onto the pressure cooker.
4.
Detach the lid from the pressure cooker body by lifting up the hinge and then
twisting the lid to the open position. Lift up the lid to remove it from the pressure
cooker body.
5.
Thoroughly wash and rinse all parts of the lid including the pressure release valve,
anti-clog filter, and float valve. Wipe dry with a clean cloth.
6.
Remove the sealing ring from lid and wash with warm soap and water. Rinse
thoroughly with warm water. See Sealing Ring Installation on how to remove and
install the sealing ring.
7.
Clean the inner pot with a sponge or non-metallic soft brush, and dry with a clean
cloth.
8.
If necessary, wipe down the control panel with a damp cloth, and dry immediately
with a clean, dry cloth.
Sealing Ring Installation
NOTE: Make sure sealing ring has no cracks or is damaged.
Removal
1.
Lift up the hinge, then twist the lid to the open position. (see picture on next page)
2.
Remove the lid from the pressure cooker.
3.
While holding the lid in place, gently pull out the sealing ring.
12

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido