4.
Place pot back into pressure cooker. Close the lid by lowering it down onto the
housing; use the handle to turn the lid counterclockwise. The 'Close' arrow on the
lid should now line up with the mark at the top of the control panel, indicating that
the lid is locked into place.
5.
Once the lid is locked in, make sure the pressure release valve is level.
6.
Attach the water collection box onto the back of the pressure cooker.
7.
Plug the pressure cooker into an electric power supply. The LCD will show "--:--"
and the unit will go into standby mode.
9
Porridge
Soup