Troubleshooting - cosori C3120-PC Manual Del Usario

Troubleshooting

Problem
Lid not closing properly.
Lid does not open.
Steam leaking from
pressure cooker lid.
Steam leaking from float
valve.
Float valve not able to rise. Insufficient amount of
Error Code
Error
Cause
Lid is not properly
positioned on body.
Sealing ring is not properly
installed.
Float valve is being
blocked.
Float valve doesn't fall
after pressure is released.
No sealing ring.
Food sticking to sealing
ring.
Sealing ring is broken.
Lid is not closed in right
position.
Food sticking to float
valve's sealing ring.
Float valve's sealing ring is
broken.
food and water.
Steam leaking from
pressure cooker lid or
pressure valve.
E1 E2
Broken circuit Short circuit in
in sensor. sensor.
E3
Unit is
overheating.
16
Solution
Properly position lid onto
the housing.
Check sealing ring to
make sure it is properly
aligned inside the lid.
Check to make sure float
valve is clean. Clean if
necessary.
Check to make sure float
valve is clean. Clean if
necessary.
Install sealing ring.
Clean sealing ring.
Part needs to be changed.
Contact customer
support.
Make sure lid is properly
closed.
Clean the float valve's
sealing ring.
Contact customer
support.
Put as much food and
water as noted on recipe.
Contact customer
support.
E4
Signal switch
broken.